Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Jabsco HotShot HD4 Heavy Duty Washdown Pump - 24V - 4 GPM - 60 PSIHotShot HD4 Heavy Duty Washdown Pump 24V 4 GPM 60 PSI Years of clean decks and satisfaction in the form of robust and reliable high flow and high pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.
HotShot HD4 Heavy Duty Washdown Pump - 24V - 4 GPM - 60 PSI
Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.
HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.
Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.
Features:
- Co-molded diaphragm technology for long life and durability
- HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures
- Efficient and quiet operation
- Integrated, sealed pressure switch for on-demand operation
- Self-priming allows for installation versatility
- Can run dry without damage
- Quick connect ports for ease of installation, servicing, and maintenance
- Vibration dampening mounting feet
- Full kit versions available which include 25' (7.6m) hose coil
Specifications:
- Motor design: Brushed, permanent magnet TENV
- Pumphead upper housing material: Glass fiber reinforced polypropylene
- Diaphragm: Co-molded TPV
- Check valves: EPDM
- Max inlet pressure: 30 PSI (2.1 Bar)
- Fluid temperature range: 32°F – 140°F (0°C – 60°C)
- Dry self-priming capability: 7ft min (2.1m min)
- Certifications: CE, ISO8846, RCM
- Ingress protection: IPX6
Fittings & Accessories:
- Quick Connect straight hosebarb and GHT fittings. Size varies by model.
- 90° 20 mesh Quick Connect strainer
- Trigger nozzle & Quick Connect hose adapters
- Kit version includes 25' HoseCoil
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Manufacturer : Jabsco
Manufacturer Part No : Q402J-118N-3A
UPC : 671880841931
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 1696 reviews
Sort
Product Reviews
★★★★★ 5
The Best!
This thing is amazing! Worked right out of the box. No drivers to install, no confusion, just plug and go. I'm using this hub to connect a mouse, a keyboard, and a monitor to my 2025 MacBook Air (M4).
Before buying this I bought a complicated, powered hub for 2x the price and wasted multiple hours trying to get the $%^&(*& thing to work, which it never did. If you want to run a display and a few peripherals, this Startech hub is the absolute best bang for your buck.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
★★★★★ 1
Quality Control Issues
I want to like this dock, I really do. I purchased it with the intention of using it as a hub for my phone + usb-c external display.
The pass-through charging never worked on this dock. Tried multiple cords and tested the dock with nothing plugged into any of the USB ports -- all of the power disappears somewhere onto the hub and the actual charge rate on my phone slows to a trickle. With nothing connected, it estimates >24hrs to charge from 30% to full.
The plus side is that the usb ports do work, though the usb-c display went from 100% reliability to <50% within a few months of purchase. Extremely frustrating.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 24, 2024
★★★★★ 5
This is the one, buy it for DeX!
Looking for a compact USB hub to connect your laptop or Samsung DeX capable device? Buy this one!
I've tried multiple similar items from name brands, and they work fine as a USB and port hub, but this one is able to support power delivery and display data through a single (capable) USB-c cable. I assume because it is noted to be capable of some combo of USB 3.2, PD 3.0 pass through and DP 1.4 alt mode. I'm not quite sure which one(s) make it possible, but it works for an HP Spectre laptop and Galaxy phone.
Only improvement suggestion is to add an additional 10gb capable USB-C port in place of the three USB-A ports, but that's being super picky.
Thanks StarTech for building another unique solution for connectivity challenges.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2025
★★★★★ 2
Usb-c passthrough started failing about a year into ownership.
This had the potential to be the perfect accessory for my M4 MacBook Air. It is very difficult to find dongles like this that support display passthrough via usb-c (meaning that if you have a usb-c display you can connect it to this and use the display). When it did work, I was able to power a triple monitor setup with my 2 port Macbook Air (with one display being driven by a displaylink adapter).
If this product had continued to work as advertised, is would be a 5 star review.
But after maybe a year of VERY sporadic use (I use this maybe once a week because my MacBook Air is not often docked) the usb-c passthrough is already failing. On a display I use every day with a different machine (a 16" MBP that has enough ports to not need any adapters) and the display and cable work perfectly fine there so I can only assume that it is this specific adapter which is failing. If I insert the connector several times, sometimes I can get it to work but my success rate just keeps dropping. There was no other reason to spend this much on an adapter that without usb-c passthrough offers just 3 usb-a ports like most much cheaper adapters. So to say I am disappointed is an understatement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
★★★★★ 4
Expensive, but it works
The good parts:
Yup, this works with DP alt mode, single cable use works for most devices I tried (steam deck, laptop, odin mini 2) even without the hub powered through the power in on the hub, I even got it working without external power to either the hub or my small usb-c monitor. However, some devices like my phone likely didn't give enough power for it to work without another power source. On my phone it worked for some usb devices without external power, but the dp alt mode didn't do work. DP alt on my phone works just fine with external power connected to the hub. Powering it with a small but powerful power bank worked fine, but lower power power banks might not keep up especially if the monitor isn't getting it's own power. It only takes a watt or two of power for the hub itself from some quick and dirty measurements charging my laptop through the pd-in on the hub.
As for the rest of it, the three usb 3 ports means you should be enough to get by for any use case, though you may need more dongles or adapters to get the type of connections you need, but quite usable as-is for a lot of purposes.
Basically it does what it says, there really is no other hub currently that can do pd alt mode, only big docks which need power supplies.
The ok parts:
*When it isn't powered* I noticed that with a monitor already plugged in, plugging it into a device would lead to the monitor not being initialized. But plugging the hub into the device first before connecting the monitor worked. No issue when it was powered. You can use this to get display out and charge with a Nintendo switch, but if it's not powered through the pd-in it probably wont switch to TV mode and output video, not sure if that's because of power or software reasons.
This is a nitpick, but if you care about the feel or aesthetic it's noticeably bland. The case is plastic and there seems to be no weighting on the inside, it's very light, which can feel cheap but it's not like adding weights would functionally make it better, the case also has a bit of a harsh feeling where it's joined, but it does feel solid and durable enough. It's clearly function over form, just barely meets the minimum bar imo.
The bad part:
You already saw, but the price is a bit steep for a hub (at $80). I'd love to see it at 60 or even 40 instead, I hope more similar hubs pop up for competition.
In summary:
It does what it says, if you know you want this and what it is then get it, I feel like it shouldn't cost this much, but it's quite usable and for now it's the only option for a DP alt mode hub.
Minus a half star each for subpar presentation and price 4/5
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 4, 2024
recommand products
TRW VL236 Engine Valve Lifter 1991-1993 Chevrolet GMC Topkick Kodiak 366 427-V8
14.99
Hardware Resources COR39-2-RW 3" W x 6-1/2" D x 10" H Rubberwood Minimal Bullnose Cap Corbel
62.93
TRW T8192 Engine Piston Rings - Standard for 1968-1990 GM 5.0L 5.7L-V8
37.99
Ultra-Twin® Respirator - Hycar™ Rubber, Hycar/Silicone, Medium
354.00
HyFlex® 11-594 Cut-Resistant Gloves, Size Large/9, 18 Gauge, Nitrile Coated, HPPE/Intercept™ Shell, ASTM ANSI Level A9/EN 388 Level F
196.00